|
Industrial Products
Specifications for Kerosend forced air heater:
| ITEM |
SPECIFIATION |
| Model name: |
KFA-190T |
| Combustion Type |
Atomization, forced ventilation |
| Ignition Type |
Automatic ignition by high-voltage dicharge |
| Fuel |
1-K Kerosene (or NO.1 Fuel Oil) |
| Fuel Tank Capacity |
13 Gal. (18.9 l) |
| Fuel Consumption |
1.4 Gal./Hr. (5.3 l /Hr.) |
| OutPut Rating |
190,000 (BTU/Hr.) |
| Pump Pressure |
7 PSI |
| Rated Volt/Hz |
220~230 Vac50Hz |
| Power (Consumption) |
280W |
| RPM |
2,800 |
| Fan Size |
￠221mm |
| Motor Safety Device |
T/P 130℃ |
| Operating Hours/Tank |
9Hr.(Approx.) |
| Hot Air Flow(CFM) |
610(Approx.) |
| Heating Area(sq.ft.) |
4,200(Approx.) |
| Operation |
ON/OFF Switch |
| Thermostat Control |
Encoder S/W(5℃~45℃ Setting) |
| Power & Error Display |
LED |
| Flame Sensing Device |
Photocell Sensor |
| Over Heat Shut off Device |
Bi-Metal : 90℃ Off/60℃ Reset |
| Electrical Protection |
Fuse.(250Vac/5Amp.) |
| Heater Weight(Empty Fuel) |
31Kg |
| Heater Size(WXDXH) |
1,090X522X6293 |
|
|
Specifications for the Gas Burning Warmair Unit:
The warmair unit is without doubt one of the best heating appliances currently manufactured in Iran and it conforms to Industrial Norms of safety and efficiency on the International scene.
This product is made of high quality material and is equipped with thermostatic controls made by Honywell Corp., ensuring the function to be up to the most exacting standards. The gas control mechanism is made by the SIT Co., in Italy, and is especially designed for this type of appliance.
This unit is capable of being thermostatically controlled to maintain constant ambient temperature. On startup, no cold air is allowed to be blown from the unit, and the fan starts only when the unit is warmed to a predetermined temperature. If for some reason the temperature exceeds a set limit, the gas is cut off and the unit cools off, preventing any mishap.
This unit has a very compact and attractive design with very high heating capacity. It is especially useful for showrooms, homes, sporting arenas, and other public places.
A version of this product is also made that uses oil instead of gas and the specification of the product is listed in the table below.
|
 |
Gas burning model:
| Fuel consumption |
Heating capacity |
Volume warmed approx |
Motor speed |
| 4.7 m3/ h |
40 000 kcal/h |
700 m3 |
1450 rpm |
| Fuel pipe dia |
Fuel type |
Elect. Connection |
Fuel tank capacity |
| 150 mm |
Natural gas/ bottled gas |
240 v 0.8 amp |
N/A |
Gas burning model:
| Fuel consumption |
Heating capacity |
Volume warmed approx |
Motor speed |
| 4.5 lit/h |
40 000 kcal/h |
700 m3 |
1450-900 rpm |
| Fuel pipe dia |
Fuel type |
Fuel tank capacity |
| 50 mm |
Kerosene |
24 lit |
|
Specification For Industrial Heaters
The oil burning model is fitted with automatic shut-off in case of power failure to ensure safe operation . These units are for use in spaces that are constantly ventilated as normally they are used without a flue pipe making them relatively mobile.
The gas burning model uses atmospheric burning process and hence does not require an electric power supply. It is fitted with a thermocouple as well as spark ignition to ensure safe and convenient operation.
The heating capacity of both models is shown in the accompanying table. |
 |
Oil burning model:
| Fuel consumption |
Heat output |
Heated Space |
Fuel tank capacity |
Fuel type |
| 6 lit/hr |
50000 kcal/hr |
1000 m3 |
26 lit |
Kerosene /Gasoil |
Gas burning model:
| Fuel consumption |
Heat output |
Heated Space |
Fuel tank capacity |
Fuel type |
| 4.8 m3 /hr |
45000 kcal/hr |
900 m3 |
N/A |
Natural Gas/Bottled |
|
| |
|
